Surface mount tyre killer - mechanical spike barrier , automatic surface mount tire killers -bump spike barrier
MADOORS SURFACE MOUNT TIRE KILLER
Mechanical Tire Killer is installed directly on the surface of the roadway. Main mechanical elements forming the construction are manufactured entirely from hardened steel. All steel plate components are very precisely manufactured (are cut using CNC and plasma cutting machines) so that they can stand harsh environmental conditions. The special hardened teeth rise 60 mm above the tire-killer’s top plate level.MADOORS surface mount spike barrier is designed to withstand 60 tons of axle load. As it will generally be installed outdoors, all the parts of the main body and teeth are hot dip galvanized/epoxy coated to thickness of 60 micrometers (60µm) in order to prevent rusting. Teeth are painted to red to attract the attention of the drivers as madoors mobile portable surface mount tyre tire killer spike barrier behaves like a bumper at the same time. Outer surface of the madoors surfaec mount tire killers can be painted to any colour as well , upon request ,at no extra cost. The teeth and the mechanism are attached to the frame with bolts. Therefore, the installation and the maintenance processes are eased with this design concept.
Mechanical surface mount tyre killer spike barrier
Madoors surface mount mecanical ans automatic tyre-killers are designed to withstand 60 tons of vehicle load as well.This type of mechanical tire killer is composed of two structures: surface mount housing frame and teeth assembly. Surface mount housing frame is connected to surface by studs and nuts.The teeth assembly is connected to the frame by bolts and nuts. The installation of the mechanical tire killer is as follows due to this design concept:
automatic hydraulic surface mount tyre killers and spike barriers
1. Place the tire-killer to the installation site.
2. Mark the floor through the holes on the base plate of the tire-killer.
3. Take the tire-killer aside and fix the steel anchors.
4. Put the tire-killer back to its original position.
5. After putting washers on the base plate of the tire-killer